10 Port L2 Managed Switch POE

Backplane 192Gbps
Forwarding Rate 15Mpps
POE power 240W
POE/POE+ Support
MAC exchange Static configuration and dynamic MAC learning

MAC browsing and removal

Configurable aging time of the MAC address

Limited number of learnable MAC addresses

MAC filtration




Private VLAN

STP 802.1D (STP), 802.1W (RSTP) and 802.1S (MSTP)

BPDU protection, root protection, and loopback protection

Multicast IGMP v1/v2

IGMP Snooping

IGMP Fast Leave

Multicast group strategy and quantity limitation

Multicast flow copying over VLANs

IPv4 Static route, RIP v1/v2, OSPF, BGP
QoS Flow classification based on L2~4 protocols

CAR flow limit

802.1P/DSCP priority re-labeling

SP, WRR, and “SP+WRR”

Congestion avoidance mechanisms like Tail-Drop and WRED

Flow monitoring and flow shaping

Security L2/L3/L4 ACL flow identification and filtration

DDoS attack prevention, TCP’s SYN Flood attack prevention, UDP Flood attack prevention, etc

Broadcast/multicast/unknown unicast storm-control

Port isolation

Port security, and “IP+MAC+port” binding (S2108POE does not support.)

DHCP Snooping and DHCP option 82 (S2108POE does not support the function.)

IEEE 802.1x authentication

Radius, BDTacacs+ authentication

Level-based command line protection

Reliability Static/LACP link aggregation


ISSU uninterrupted system upgrade

Management Console, Telnet, SSH2.0,


SNMP v1/v2/v3



Power Consumption <30W
Power 48VDC
Material Body: Aluminum
Dimension Net : 165 (L) x 148 (H) mm x 54 (W) mm
Operating Temp. -40°C ~ 75°C (-40°F ~ 167°F)
Humidity 10 ~90%(Non condensing)



    Switcher Features
    • SW2500P Series supports the telecom-level Ethernet-ring protection protocol with a protection shift time of less than 50ms, STP/RSTP, backup of active and standby uplinks, and LACP link aggregation to cater to the requirements of high reliability of carriers;
    • SW2500P Series has powerful ACL functions to access and control L2-L7 data based on physical port, providing carriers flexible and various policy control methods;
    • SW2500P Series supports In-Service Software Upgrade (ISSU) to ensure the unremitting data forwarding during system upgrade;
    • SW2500P Series supports various L2 multicast functions such as IGMP-snooping, user fast-leave mechanism and trans-vlan multicast copy to fully meet the operation requirements of carrier’s IPTV
    • SW2500P Series supports IEEE 802.3AF/AT standard, External 48VDC power supply, free of external power supply but with 8-port AF full load power supply of 240W.
    • Harden Switcher operation from -40˚C to 80˚C



    Full Gigabit POE Switcher

    • 8 10/100/1000Base-T ports, 2 1000Base-X ports
    • 11 AF/AT compliance


    POE Power Supply

    • Support hot restart and POE non-stop power supply
    • Support the configuration of electric port priority when the power is inadequate
    • Support up to 2KV surge-proof of the POE port and power supply


    Varied QoS Policies

    • Support priority retagging and complicated flow classification based on VLAN, MAC, source address, destination address, IP or priority, better streamlining carrier’s services
    • Provides flexible bandwidth control policies, supporting port-/flow-based flow limit, ensuring the line speed forwarding of each port Support multiple queue schedule algorithms such as SP, WRR and “SP plus WRR”


    Security Features

    • The advanced hardware infrastructure design realizes the level-based packet schedule and packet protection, prevents DoS-/TCP-related SYN Flood, UDP Flood, Broadcast Storm or large traffic attacks, and supports level-based command line protection, endowing different levels of users with different management permissions
    • Perfect security authentication mechanisms: IEEE 802.1x, Radius and BDTacacs+; supports storm/multicast/unicast limit, ensuring the normal running of equipment in harsh network conditions; supports perfect ring detection mechanism, ensuring the long-term stable running of network
    • Support port isolation within the same VLAN, DHCP-Snooping, and IP + MAC + Port binding


    Management and maintenance

    • Support many management modes such as the console port, Telnet, SSH;
    • Supports the WEB management mode, which is easy and efficient for installing and debugging the device;
    • Supports TFTP-patterned file upload/download management;
    • Supports ISSU (In-Service Software Upgrade);
    • Supports SNMP and BDCOM NMS smart network management platform. The combination realizes automatic equipment discovery, network topology management, equipment configuration management, performance data statistics and analysis and trouble


    There are no reviews yet.

    Be the first to review “10 Port L2 Managed Switch POE”